Use the sliders to set the voltage between 0 and 10 Volts, and to change the value of the resistors. The current is depicted by the blue arrow.
The input voltage is V1= Volts.
R1= Ohms. 0 Ohms 10 Ohms
R2= Ohms. 0 Ohms 10 Ohms
The current is I=V1Rtotal=V1R1+R2=
The voltage divider ratio = R2R1+R2=
Finally the output voltage V2=I⋅R2=V1R2Rtotal=V1R2R1+R2 =
V1· = Volts.