Use the sliders to set the voltage between 0 and 10 Volts. The current is depicted by the blue arrow.

Vin=+2

Vin=-2

R1= kOhms.       1 kOhm 10 kOhm
R2= kOhms.       1 kOhm 10 kOhm

The gain of the circuit is $G = \frac{Vout}{Vin} = -\frac{R1}{R2}$ =
The input voltage is Vin = Volts.

The output voltage is $Vout = G \cdot Vin$ = Volts. Since the absolute value of the caluclated output voltage is more than 10 V, the amplifier saturates at ± 10 V.